Resources ·

Chlorine (Cl2) Gas Leak Risk & Complete Response Guide with WANDI EDW500 Portable Multi-Gas Detector

Chlorine (Cl2) is a highly toxic gas widely used in water treatment, paper, and chemical plants. The WANDI EDW500 is an IECEx-certified portable multi-gas detector capable of simultaneously measuring 5 gases including Cl2, providing real-time protection for workers on site.

Home / Resources / Chlorine (Cl2) Gas Leak Risk & Complete Response Guide with WANDI EDW500 Portable Multi-Gas Detector

Chlorine (Cl2) is an oxidizing toxic gas widely used in water treatment, paper/textile bleaching, chemical production, and semiconductor etching processes. Even at 1 ppm, it causes irritation symptoms; above 10 ppm, it becomes life-threatening. The WANDI EDW500 holds the IECEx international explosion-proof certification (IECEx TPS 25.0057X) and simultaneously measures 5 gases including Cl2, providing real-time protection for workers.

What is Chlorine (Cl2) Gas?

Chlorine (Cl2) is a yellow-green gas with a pungent odor. It is 2.5 times heavier than air, accumulating at ground level and in low-lying areas. Main application areas include water disinfection, chlorine-based chemical production, paper/textile bleaching, and semiconductor etching.

Health Effects of Chlorine Gas

염소가스 누출 위험 화학공장 산업시설
염소 가스를 취급하는 화학공장 현장 (출처: Unsplash / Patrick Hendry)
Concentration (ppm)Health EffectsRisk Level
≤0.5Detectable odor, mild irritationLow
1–3Eye, nose, throat irritation; coughingCaution
3–10Severe coughing, chest pain, dyspneaWarning
10–25Pulmonary edema, serious respiratory damageDanger
≥430Fatal within 30 minutes (IDLH)Immediately Dangerous

Source: NIOSH, ACGIH TLV-TWA: 0.5 ppm, OSHA PEL: 1 ppm

WANDI EDW500: The Perfect Solution for Cl2 Sites

IECEx-Certified Explosion-Proof Safety

실리콘 화학회사 WANDI EDW500 가스측정기 납품 설치 사례
실리콘 화학회사 EDW500 5가스 측정기 납품 사례 — 제이솔루션 (충북 괴산)

The EDW500 holds IECEx TPS 25.0057X certification issued by TÜV SÜD. Its explosion-proof rating is Ex da ia IIC T4 Ga (Zone 0, EPL Ga), making it safe to use even in Zone 0 — the most hazardous explosion-proof classification. Ideal for chemical plants, water treatment chemical storage, and all environments where Cl2 explosion-proof ratings are required.

5-Gas Simultaneous Measurement — Including Cl2

A single EDW500 simultaneously monitors up to 5 gases: Cl2, O2, CO, H2S, and EX (combustible gas). In chlorine process environments, oxygen depletion and Cl2 spikes can occur simultaneously, making multi-gas detection essential.

Prevention Scenario with WANDI

산업 시설 FIX800 가스측정기 유지보수 및 독성가스 감지기 설치 현장
산업 시설 가스측정기 유지보수 및 추가 설치 현장 — 브이피이코리아 (인천)
  1. 1Worker carries EDW500 into Cl2 pipeline inspection zone
  2. 2Cl2 exceeds 1 ppm → instant vibration, audible, and LED alarm
  3. 3Real-time alert sent to manager via cloud monitoring system
  4. 4Worker evacuates immediately → leak point identified and isolated
  5. 5All measurement data auto-saved to cloud for incident analysis and prevention

🏆 IECEx International Explosion-Proof Certification

Certificate: IECEx TPS 25.0057X | Certifying Body: TÜV SÜD | Rating: Ex da ia IIC T4 Ga | Zone: Zone 0 (EPL Ga)

A Closer Look at the WANDI EDW500

Below are real photos of the WANDI EDW500 portable multi-gas detector and its use on site.

WANDI EDW500 portable multi-gas detector
WANDI EDW500 portable multi-gas detector
WANDI EDW500 product and features
EDW500 — simultaneous 5-gas monitoring for site safety

FAQ

Chlorine (Cl2) is a yellow-green gas with a pungent odor. It is 2.5 times heavier than air, accumulating at ground level and in low-lying areas. Main application areas include water disinfection, chlo...

#chlorine gas detector #Cl2 monitoring #EDW500 #IECEx certified #portable gas detector #industrial safety #toxic gas