Resources ·

Ozone (O3) Gas Hazards & How to Respond with WANDI EDW500 5-Gas Detector

Ozone (O3) is a powerful oxidizing agent used in water treatment, semiconductor, and food processing facilities, causing respiratory irritation from as little as 0.1 ppm. The WANDI EDW500 is an IECEx-certified 5-gas portable detector providing real-time O3 leak detection and worker protection.

Home / Resources / Ozone (O3) Gas Hazards & How to Respond with WANDI EDW500 5-Gas Detector

Ozone (O3) is a powerful oxidizing agent widely used in water purification, semiconductor cleaning processes, food sterilization, and medical device disinfection. However, even at 0.1 ppm, it begins to irritate the respiratory tract, and at high concentrations it causes pulmonary damage. The WANDI EDW500, certified with IECEx TPS 25.0057X international explosion-proof certification, simultaneously measures 5 gases including O3, protecting workers in any O3-generating environment.

What is Ozone (O3) Gas?

Ozone (O3) is an unstable triatomic molecule of oxygen with a distinctive sharp odor (similar to fresh air after rain). Its powerful oxidizing properties make it valuable for sterilization and deodorization, but this same property makes it highly toxic. Industrial O3 is generated by ozone generators, UV equipment, and high-voltage discharge devices.

Health Effects of Ozone

정수처리장 오존 처리 시설 가스측정 환경
정수처리시설 오존 처리 구역 — O3 가스측정이 필수인 환경 (출처: Unsplash / Patrick Federi)
Concentration (ppm)Health EffectsRisk Level
0.01–0.05Detectable characteristic odorDetection
0.1Eye/nose/throat irritation, headacheCaution (OSHA PEL)
0.3–0.5Coughing, chest pain, reduced lung functionWarning
1–10Severe lung damage, asthma exacerbationDanger
≥10Immediately life-threatening (IDLH)Immediately Dangerous

Source: NIOSH IDLH: 10 ppm, OSHA PEL: 0.1 ppm, ACGIH TLV-TWA: 0.05–0.1 ppm

WANDI EDW500: Optimal Solution for O3 Sites

IECEx Explosion-Proof Certification — Zone 0 Safe

부산 정수처리장 FIX800 오존 농도 측정기 납품 현황판 설치 사례
정수처리장 오존(O3) 모니터링 FIX800 & FIX-DS 납품 사례 — 브이피이코리아 (부산)

The EDW500 holds IECEx TPS 25.0057X certification from TÜV SÜD with explosion-proof rating Ex da ia IIC T4 Ga (Zone 0, EPL Ga). It can be safely used even in high-risk environments where oxidizing gases like O3 are constantly present.

5-Gas Simultaneous Measurement Including O3

A single EDW500 simultaneously monitors up to 5 gases: O3, O2, CO, H2S, and EX. In ozone treatment zones, O3 concentration spikes can occur simultaneously with oxygen level changes, making multi-gas detection essential.

🏆 IECEx International Explosion-Proof Certification

정수 여과지 수처리 시설 오존 처리 공정
정수처리 여과 시설 오존 처리 공정 현장 (출처: Unsplash / Ivan Bandura)

Certificate: IECEx TPS 25.0057X | Certifying Body: TÜV SÜD | Rating: Ex da ia IIC T4 Ga | Zone: Zone 0 (EPL Ga)

A Closer Look at the WANDI EDW500

Below are real photos of the WANDI EDW500 portable multi-gas detector and its use on site.

WANDI EDW500 portable multi-gas detector
WANDI EDW500 portable multi-gas detector
WANDI EDW500 product and features
EDW500 — simultaneous 5-gas monitoring for site safety

FAQ

Ozone (O3) is an unstable triatomic molecule of oxygen with a distinctive sharp odor (similar to fresh air after rain). Its powerful oxidizing properties make it valuable for sterilization and deodori...

#ozone gas detector #O3 monitoring #EDW500 #IECEx certified #water treatment safety #portable gas detector #industrial ozone